All Broadened Horizons’ Sip & Puff Switches, Headsets, and Flexarms feature our replaceable Anti-Contamination Mouthpieces
Bundles Include:
- Choice of Sip-n-Puff Switches
- Sip or Puff
- Sip or Puff or Latching Puff
- Choice of Headset
- Bluetooth Over-the-Head mono – PC, Android, iOS, Playstation, Nintendo
- USB Over-the-Head stereo – PC, Playstation
- Dynex DX-840 Mono or DX-850 Stereo – 7 oz
- Earpiece Frequency Response: 20 Hz – 20 kHz, Impedance: 32 ohm
- Microphone Frequency Response: 100 – 16000 Hz, Mic Impedance: 2200 ohm
- USB Behind-the-Neck stereo – PC, Playstation
- Sip-n-Puff Tubing Tubing Kit – mounts on microphone arm as pictured for optimal positioning. Features 2 replaceable Anti-Contamination Filters Mouthpieces. 1.2 µ HEPA Rated (removes 99.9% bacteria & viruses) and Hydrophobic (blocks moisture in breath or saliva). These are the same high-tech materials and filter elements used on ventilators and blood transfer devices in hospitals as well as food processing equipment.
- 10′ 1/8″ ID PVC Tubing – Cut into two 5-foot or three 3.3-foot pieces. Replace when it becomes dirty or between users.
- 18″ stainless steel wire – Insert inside tubing before the mouthpiece receiver to make it positionable. Will not rust. Can be washed in soapy water when replacing the tubing.
- 1 Mouthpiece Receiver for ⅛” Tubing – Insert barb into the end of the tubing. Blue mouthpiece disc inserts into the receiver with a ½ twist
- 1 Straight Anti-Contamination Mouthpiece
- 1 Curved Anti-Contamination Mouthpiece – Use a curved mouthpiece on a headset microphone arm and a straight mouthpiece on a flex arm mount. Mouthpieces are both hydrophobic (block all moisture from breath or saliva) and 1.2 µm HEPA rated (block 99.9% of bacteria and viruses). Replace monthly or between users. 12 Packs available SKU SwP1282.a
- 3 Bite Bulbs – Insert into the end of a mouthpiece or tubing to use as a bite switch. Replace between users. 25 Pack available SKU SwP1285.a
- 1 Large Squeeze Bulb – Insert into the end of mouthpiece or tubing to squeeze in hand as a grip switch, position on wheelchair footplate with velcro straps and compress with the foot, or position on wheelchair armrest with velcro straps and compress with a side of the fist, forearm, or elbow.
- 3 Velcro Bundling Wrap Strips – to hold tubing along the side of a flex arm mount, wheelchair, etc
- 3 Black Plastic Zip Ties – alternative to velcro bundling rap strips to hold or position tubing
- 2 Shirt-front Clips – snap around tubing to clip to front of shirt
- 1″ Adhesive Mounting Pad – slide a black plastic zip tie through it to hold tubing to the side of Quadmouse or any flat surface
- 5″ inch piece of 3/4″ diameter heat shrink – slide over the microphone arm on a headset as pictured above, then insert tubing through heat shrink with white mouthpiece receiver just outside the heat shrink. Shrink with a lighter, match, strong hair dryer, or heat gun. Remove heat as soon as it shrinks, excessive heating will not cause it to shrink more but only burn.
- Vacuum Sealed – maintain clean until ready to use
Replacement Packs available for Multi-user
- 12 Pack Anti-Contamination Mouthpieces – change monthly and multiuser environments
- Sip-n-Puff Tubing Tubing Kit
Specifications
USB Over-the-Head for PC / Mac
Dynex DX-840 Headset is equipped with high-quality microphones that capture only the primary source sound and reject any background noise. Ideal for computers and PlayStation series of products, the headphones provide clear sounds for maximum enjoyment.
